KIVI-PEKKA MULTICULTIVATOR
The multicultivator’s two combined cultivation elements—a cultivator and disc harrow, each with its own depth adjustment—offer operational fl exibility.
This makes it possible to adapt to a wide variety of conditions. The cultivator tines, which are sweep shares arranged in three rows and fi tted with a stone dislodging mechanism, provide a rougher and deeper tilling result (0–20 cm).
The disc harrow unit behind it levels and refi nes the surface left by the cultivator. The machine can also be used as a disc harrow alone (0–15 cm).
The front and rear transport wheels keep the harrow constantly aligned with the surface of the fi eld and at a constant working depth, thus producing a very even furrow base and fi nished seedbed in just one pass.
The large transport wheels in the centre of the machine allow for tight turning radii, thus making the machine very agile.
Extremely well-sealed and reliable SKF bearings are used in the discs.
FEATURES
The cultivator tines, which are sweep shares arranged in three rows and fi tted with a stone dislodging mechanism, perform reliably, even in demanding, rocky conditions. The sweep shares cut the entire furrow base open and their working angle can be adjusted.
The discs are mounted to a separate subframe on an elastomer suspension, and their working depth can be adjusted by changing the cylinder length.
The multicultivator is supported by large, hydraulically adjustable corner wheels at the front of the machine. The wheels keep the multicultivator at a constant working depth. The sturdy construction of the multicultivator also allows the wheels to slip slightly to the side.
The large transport wheels ensure a smooth ride, both on the road and in the fi eld. The short distance between the tow point and the transport wheel axle in the centre of the machine improves handling.
Adjustable offset discs prevent the cultivator tines from throwing soil beyond the working width, which ensures an even, clean result.
The stone dislodging mechanism protects the cultivator tines from being damaged by obstacles.
The wide sweep share blade cuts the entire width of the furrow and mixes the soil effectively.
The working depth of the cultivator unit can be limited using stoppers fi tted to the cylinder shaft.
The lighting set comes standard.
Cultivator (working depth: 0-20 cm).
Disc harrow (working depth:0-15 cm).
Cultivator + disc harrow
(working depth: 0-20 cm).
| MULTICULTIVATOR 325 | MULTICULTIVATOR 425 | |
|---|---|---|
| Working width cm | 325 | 425 |
| Weight w/ stand. equipment kg | 2750 | 3300 |
| Power requirement (from) | 140 hp | 140 hp (325) or 180 hp (425) |
| Number of tines | 7 | 9 |
| Number of disks | 26 | 34 |
| Number of adjustable offset discs | 2 | 2 |
| Disc spacing cm | 25 | 25 |
| Work output ha/hour | 2,5 – 5,0 | 3,2 – 6,4 |
| Number of hydraulic blocks | 3 | 4 |
