LIVAKKA LHDD HITCH ARM-MOUNTED DISC INJECTOR
Working widths 6m and 8m
The LHDD disc injector is a hitch arm-mountable (CAT III 4-point) distributor, which injects slurry to a depth of up to 10 cm. The slurry is injected directly into the substrate – effi cient and environmentallyfriendly.
LHDD disc injectors are suitable for the spreading of slurry on turf, stubble and tilled substrates. Ground guides are available as optional accessories for the disc injector.
LHDD disc injectors come with Harsø side-feed distributors fi tted with offset cutters. The distributors also work effectively with viscous slurry containing a lot of hay and feed traces. The cutter blades are tempered and, if necessary, can be replaced, thus ensuring reliable, trouble-free operation for years of service. The coulter hoses are 50 mm in diameter, which allows for the injection of a large amount of slurry.
The disc injector has a three-section construction. The side sections are raised by cylinders and
automatically locked with cylinder-operated latches. The disc injector offers ample ground clearance for transport. This allows for the use of a hitch arm with wide travel and hydraulic coulter suspension. Disc injector weighting is done with a 4-point hitch arm.
• Double disc construction – the discs make a V-shaped cut
• They make an amply sized cut in the soil to allow for fast absorption
• Coulter spacing 27 cm
• Coulter diameter 40.5 cm – discs turn easily and are not prone to pulling up stones
• Sealed, lubricated bearings
• Hydraulic suspension on each coulter ensures that they are evenly pressured and follow the contours of the terrain very closely.
• Each coulter has a travel of approximately 30 cm, thus allowing it to pass easily over even large obstacles.
• The coulters can also turn 30 degrees independently – curved runs will not tear up the ground
• Optional hose lock function
• The nozzles between the coulters precisely direct the slurry into the open furrow without clogging.
• The large-diameter Harsø distributor and 50 mm hoses ensure the smooth fl ow of slurry
• A surface spreader can also be mounted on the disc injector
• LED lights and a refl ector triangle come standard
